3
Lift your arm until skin under arm stretches slightly.
B
For shaving other sensitive areas, stretch skin taut with
your fingers.
4
Hold Razor so that Shaving Head is in full contact with
the skin. Shave with gentle strokes, using light pressure
(Fig. 7).
B
Pressing too hard may cause skin irritation, and Razor
will not function properly.
5
Do not use deodorant or alcohol-based lotions
immediately before or after shaving.You may, however,
want to use talcum powder.
6
To turn Razor Off, depress small Safety Button in the
center of the Bodyselect Switch and push the Switch
down to the center, Off, position.
8.
9.
B
For best shaving performance, it is suggested to lightly
oil Shaving Head regularly by spreading a drop of light
sewing machine oil over the foil and trimmers (Fig. 10).
If this does not improve the performance of your razor,
it may be time to change foil.
B
Never immerse Charging Base in water or other liquid.
You may clean by wiping with a damp cloth.
A. AFTER EACH USE
After each use, Razor should be quickly cleaned by
rinsing under running water or dipping and shaking
gently in water.
IMPORTANT: DO NOT
keep Razor submerged in
water for long period of time.
B. ONCE A MONTH – CLEANING SHAVING HEAD
IMPORTANT:
DO NOT
apply pressure to Shaving Foil.
1
To remove Shaving Head, simultaneously press in small
buttons on both sides of Razor on Angled Shaving Head
while pulling head up and out (Fig. 11).
B
Hold Shaving Head by plastic housing only –
Shaving
Foil is very delicate and should not be handled.
If foil becomes worn or damaged, replace it.
2
Hairs can be removed from Shaving Head housing by
using a soft brush or by lightly blowing out hairs.
NOTE:
Avoid using brush on Shaving Foil as this may cause
damage.
MAINTENANCE INSTRUCTIONS
IMPORTANT
B
It is recommended that you replace your shaving foil
once a year.
B
Switch Razor Off and remove Charging Base from
electrical outlet before cleaning.
B
Never clean, remove, or replace Shaving Head while
motor is on.
B
Do not apply pressure or touch Shaving Head with hard
objects as this may dent or damage foil or trimmers.
If damage occurs, replace foil.
B
Check foil regularly.
B
Never use a razor with a damaged or broken foil.
