•
For additional protection, we advise
you to install a residual current device
(RCD) in the electrical circuit that
supplies the bathroom. This RCD must
have a rated residual operating current
not higher than 30mA. Ask your installer
for advice.
•
Do not insert metal objects into the air grilles to avoid electric shock.
•
Never block the air grilles.
•
Before you connect the appliance, ensure that the voltage indicated
on the appliance corresponds to the local power voltage.
•
Do not use the appliance for any other purpose than described in
this manual.
•
Do not use the appliance on artificial hair.
•
When the appliance is connected to the power, never leave it
unattended.
•
Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
•
Do not wind the mains cord round the appliance.
•
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
Noise level: Lc = 76 dB [A]