Philips HP4638, Manual

Page: 9 / 104

1 After washing, squeeze excess water out of the hair with your
hands and then towel-dry the hair. Use a comb to disentangle the
hair gently from the roots to the tips.
Divide the hair into sections using clips. Start at the back.
To dry each section, pull a straightening brush down the hair length.
Follow the brush with the hairdryer, with its nozzle pointing
towards the hair ends.
When you have finished drying each section, set the hairdryer to
the cool setting for a final cool shot. This closes the cuticles and
adds shine to the hair.
Tip: Philips SalonPro hairdryers have a lower drying temperature and a
stronger airflow than regular dryers. Thanks to this combination, they dry just
as quickly as regular hairdryers but in a gentler way
using the appliance
straightening your hair
Straighteners are powerful styling tools and must always be used with
care.
As with all straighteners that reach salon-high temperatures, do not use
the appliance frequently to avoid damage to the hair. If you use the
straightener incorrectly, you could overheat your hair or even burn it.
Always follow the steps below:
1 Put the plug in the wall socket.
Push the on/off slide to ‘ON’.
The power-on light goes on (Fig. 2).
The straightening plates heat up rapidly and are ready for use
within 90 seconds.
Never leave the appliance unattended when it is plugged in. Never put
the appliance on a surface that is not heat-resistant when it is heating
up and when it is hot.
,
,
EnglisH
9