Philips HEARTSTART XLT M3500B, Instructions For Use Manual

Page: 23 / 180

Getting Acquainted
M3500B HeartStart XLT Defibrillator/Monitor 2-3
2
- Powers on the HeartStart XLT.
- Powers off the HeartStart XLT.
Defibrillation Controls - softkeys that perform the defibrillation function
displayed in the softkey label above each button; control both AED and Man-
ual Mode defibrillation.
Manual Mode Controls - provide access to Manual Mode and control of syn-
chronized cardioversion and pacing (if the option is present).
Audiovisual Controls:
Adjusts the display contrast.
Adjusts the size of the ECG waveform displayed, printed, and stored.
Pressing and simultaneously generates a 1 mV calibration pulse.
Adjusts the volume of voice prompts and the QRS beeper.
Monitoring Controls - softkeys that perform the monitoring function dis-
played in the softkey label below each button; control heart rate and SpO
2
alarms and select the ECG source to monitor.
Print Controls - perform the function shown above each button. The print
controls from left to right are:
Print
Strip Prints ECG data, defibrillation events, and marked events real-
time or with a 6 second delay (as configured). Press to start print-
ing; press again to stop printing.
Print
Summary Prints the Event Summary. (See “Storing, Retrieving & Printing”
for more information.) Printing may be stopped by pressing the
or button.
Mark
Event Inserts a time-stamped annotation in the Event Summary. May be
configured to print an annotated ECG strip when pressed.
Print
Summary
Print
Strip