manualshive.com logo in svg

Philips HearLink miniRITE T R Charger, Instructions For Use Manual, Page: 75 / 100

Share
Download
Philips HearLink miniRITE T R Charger Instructions For Use Manual Download Page 75

75

Description of additional symbols used on labels

Keep dry 

Indicates a medical device that needs to be protected from moisture.

Caution symbol

Consult instructions for use for warnings and cautions.

Catalog number 

Indicates the manufacturer’s catalog number so that the medical device can be 

identified.

Serial number 

Indicates the manufacturer’s serial number so that a specific medical device 

can be identified.

Medical Device

The device is a medical device.

Battery recycling symbol

Li-ion battery recycling symbol.

Temperature limit

Indicates the temperature limits to which the medical device can be safely 

exposed.

Humidity limitation

Indicates the range of humidity to which the medical device can be safely 

exposed.

Radio Frequency Identification

Indicates the presence of a passive radio-frequency identification tag 

incorporated into the device for manufacturing and service purposes.

Summary of Contents for HearLink miniRITE T R Charger





































































































Reviews:

No comments