manualshive.com logo in svg

Philips HearLink miniRITE T R Charger, Instructions For Use Manual, Page: 74 / 100

Share
Download
Philips HearLink miniRITE T R Charger Instructions For Use Manual Download Page 74

74

  About     Getting started     Daily use     Options     Warnings     

More info

  

Description of symbols and abbreviations used in this booklet

Made for Apple badges

Indicates that the device is compatible with iPhone, iPad and iPod touch.

Android badge

Indicates that the device is compatible with Android.

Hearing loop 

This logo incorporates the universal symbol for hearing assistance. 

The “T” signifies that a hearing loop is installed.

Radio Frequency (RF) transmitter

Your hearing aid contains an RF transmitter.

GTIN

Global Trade Item Number

A globally unique 14-digit number used to identify medical device products 

including medical device software. GTIN in this booklet is related to medical 

device firmware (FW). GTIN on regulatory packaging label is related to medical 

device hardware.

REACH Declaration

REACH requires Philips Hearing Solutions to provide chemical content infor-
mation for Substances of Very High Concern (SVHC) if they are present above 
0.1% of the article weight. Recent information can be found on the website 
hearingsolutions.philips.com/REACH.

Summary of Contents for HearLink miniRITE T R Charger





































































































Reviews:

No comments