Philips HearLink 5010 MNR T R User Manual Download Page 65

Page: 65 / 80

The hearing aid

LED blinks red

when the hearing

aid is placed in the

charger

System error

Contact your hearing care professional

Pairing issue

with Apple device

Bluetooth

connection failed

1. Unpair your hearing aids

(Settings

General

Accessibility

MFi Hearing

Devices

Forget this device).

2. Turn Bluetooth

off and on again.

3. Turn off and turn back on the hearing aid.

4. Re-pair hearing aids

(see section “Pairing hearing aid with iPhone”).

Only one hearing aid paired

If none of the above solutions work, consult your hearing
care professional for assistance.

Symptom

Possible causes

Solutions

Hearing aid LED

remains off when

the hearing aid

is placed in the

charger

The charger is not switched on

Verify that the charger power supply is connected
correctly

The hearing aid or charger is
either too warm or too cold

Move the charger and hearing aid to a location with
a temperature between 41°F to 104°F

Charging is incomplete. The
room temperature exceeds
95°F, which prolongs the
charging time. The charger has
stopped charging to protect
the battery.

Reinsert the hearing aid into the charger. This
will complete the charging within approximately
15 minutes.

The hearing aid is not
correctly inserted into the
charger

Check the charger slots for foreign objects

Summary of Contents for HearLink 5010 MNR T R

















































































Search results

Summary of Contents for HearLink 5010 MNR T R

Reviews:

Related manuals for HearLink 5010 MNR T R

Brands by name

Popular brands

Philips HearLink 5010 MNR T R, User Manual

Search results

Summary of Contents for HearLink 5010 MNR T R

Reviews:

Related manuals for HearLink 5010 MNR T R

Brands by name

Popular brands