47
General notes on playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super)Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3-CD
You can operate the video recorder using the remote control or the
buttons on the front of the DVD recorder.
a
The display will read '
PIN
'
b
The child lock has been activated for the inserted disc. Read the sections
on 'Child lock' and 'Releasing a disc' in the chapter on 'Access control
(child lock).
a
The menu on the screen is showing an 'X'
b
Some DVD discs can be manufactured so that certain steps are required
before the disccan be played, or so that only limited operation is possible
during playback. When an 'X' appears on the screen the selected feature
is not possible.
a
The screen is showing regional code information
b
Since DVD films are not normally released in all parts of the world at the
same time, all DVD players have a specific regional code. Discs can be
given a regional code. If the regional codes differ between the player and
the disc, playback is not possible.
b
The regional code is shown on the label on the back of the machine.
b
The regional code does not apply to recordable DVDs.
a
I can see the message '
EMPTYDISC
'
b
The disc does not contain any recordings.
a
'
DISC ERROR
'will appear on the display
b
Recording could not be completed correctly because of a disc error. Check
the disc and clean it if necessary.
a
A dialog box appears asking you whether you want to delete
the contents or eject the disc
b
The discinserted is a DVD+RW but its contents are not DVD
video-compatible (e.g. a data disc). Recordings on this disc can only be
made if the entire discis first deleted with the
REC/OTR
n
button.
Switch over to the actual TV channel during
playback
As soon as you turn on the DVD recorder, the currently selected TV
channel on the DVD-Recorder is recorded in a temporary storage
(Time shift Buffer).
Recordings in the time shift buffer will be automatically deleted e.g.
after 3 hours if the period of the time shift buffer is set to 3 hours
(factory setting).
You can play back a disc, while the current TV show is still being
recorded.
1
To interrupt playback from a disc, press
TUNER
P
You will see the TV-show from the selected TV channel on
the DVD-recorder
O
To continue playback, from the disc press
DISC MENU
.
Inserting a disc
1
Press the
OPEN/CLOSE
J
button on the front.
OPENING
P01
P
The disc tray will open. While the disc tray is opening, the
display shows '
OPENING
' and then '
TRAY OPEN
' when the tray
is fully open.
2
Carefully place the disc in the tray with the label facing up and
press
PLAY
G
or
OPEN/CLOSE
J
.
P
'
CLOSING
' and then '
READING
' will appear in the display. The
information on the disc will be read.
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The
labelling for each side is in the centre of the disc. To play a side its label
must be facing up.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the
STOP
h
button on the remote control until the
dialog box shows '
OPENING
' or '
CLOSING
'.
Playback from a disc
Summary of Contents for HDRW 720/17
Page 1: ......
