background image

• 19 •

English

Red

•  Turn the selector switch clockwise to 

the “

” position to start dispensing 

the descaling solution.

Red

•  The machine carries out a quick di-

spensing cycle of the descaling solution 
through the steam wand.

Red

•  When the machine stops the dispensing 

through the steam wand, turn the 
selector switch back to the “ ” position.

Red

•  The descaling solution is dispensed 

inside the machine and collected into 
the drip tray.

Red

•  Once this second dispensing is comple-

te, turn the selector switch clockwise 
to the  “

”position to continue the 

descaling cycle through the steam wand.

Red

Red

•  When the solution in the tank is fi ni-

shed, the icon on the side is displayed to 
indicate that the selector switch must 
be brought back to the “ ” position.

•  The dispensing of the descaling solu-

tion at regular intervals is managed 
automatically by the machine (the bar 
shows the cycle progress).

Red

•  The icon indicates that the tank must 

be rinsed and fi lled. 

  Rinse the water tank thoroughly 

and fi ll it again with fresh drinking 
water up to the MAX level.

•  Empty the container used to collect the 

liquid dispensed by the machine and 
place it back under the steam wand.

Red

•  When inserting the tank filled with 

water in the machine, the icon on the 
side is displayed; turn the selector 
switch clockwise to the “

” position.

Red

•  The machine starts the rinse cycle. 

In this phase the whole water tank 
content is dispensed through the steam 
wand.

Red

•  When the water in the tank is fi nished, 

the icon on the side is displayed to 
indicate that the selector switch must 
be brought back to the “ ” position.

Summary of Contents for HD8837/06





























Reviews: