34
The descaling cycle is activated.
The bar shows the cycle's progress.
If the containers need to be emptied,
press the "PAUSE" button.
Then, press the "START" button when the
container has been emptied and replaced.
At the end of the fi rst step, when the
descaling solution is fi nished, the
machine will require a tank rinse.
Rinse the water tank and refi ll it with
fresh drinking water.
Then, press the "OK" button.
Empty the drip tray placed under the
dispensing spout (page 38 - fi g. 2) and
then replace it on the machine.
Then, press the "OK" button.
Empty the drip tray placed under the
dispensing spout (page 38 - fi g. 2) and
replace it back onto the machine.
Then, press the "OK" button.
Place a container under the dispensing
spout and a container under the hot
water wand.
Then, press the "OK" button.
Fill half the carafe with fresh water
(page 36).
Insert the carafe and place it in the
brewing position. Then, press the "OK"
button.
Completely empty the carafe and fi ll it
with fresh water (page 36).
Insert the carafe and place it ready for
brewing. Then, press the "OK" button.
A default amount of water is needed for the rinsing step. This allows performing an ideal rinse cycle to ensure the best conditions to
brew products. The message about fi lling the tank for the rinse cycle is normal, as it is part of the procedure.
MAINTENANCE
PAUSE
STEP 1/2 DESCALING
7
PAUSE
TEP 1/2 DESCALING
8
OK
RINSE TANK &
FILL WITH WATER
9
OK
RINSE TANK &
FILL WITH WATER
10
OK
EMPTY TRAY UNDE
BREW GROUP
4
OK
EMPTY TRAY UNDE
BREW GROUP
11
OK
PLACE A CONTAINE
UNDER HOT WATER
CARAFE DISP SPOU
6
OK
FILL HALF CARAFE
WITH WATER. INSER
IN BREW. POSITION
5
OK
FILL HALF CARAFE
WITH WATER. INSER
IN BREW. POSITION
12
