Philips HD8705, Insrtuctions

Page: 11 / 90

,
Place 2 SENSEO
®
coffee pods in the 2-cup pod holder
°°
.
Note: Make sure the coffee in the pod(s) is evenly distributed and press the
pod(s) lightly into the pod holder.
Note: Never put normal ground coffee or use torn pods in the
SENSEO
®
machine, as this causes it to become blocked.
7 Close the lid and lock the lever.
Always make sure the lid is properly locked. Push the lever down until it
snaps home with a click.
Never start brewing with the lid open. The lid must be properly closed.
8 Place one cup or two cups under the spout openings.
The cups you use should have a capacity of at least 150ml. Do not use
cups that are too large, as they cause the coffee to get cold more quickly.
9 Press the button that indicates the number of cups of SENSEO
®
coffee you want to brew.
-
°
for one cup
-
°°
for two cups
,
The SENSEO
®
coffee machine starts brewing.
- The machine automatically supplies the optimal amount of water.
- You can interrupt the brewing process at any time by pressing the
on/off button
I
. If you switch the machine back on after you have
interrupted the brewing process, the machine does not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as
this causes the machine to draw in air. When this happens, the next cup
will only be partly filled.
Note: If you only get a small quantity of coffee or no coffee at all out of the
machine, you have not flushed the machine properly before first use. As a
result, the boiler is not or not completely filled. Flush the machine properly
(see chapter ‘Preparing the machine for use’) before you brew another cup of
coffee.
10 After use, lift the pod holder out of the machine and remove the
coffee pod(s).
CLIC
K
EnglisH
11
4222.001.9880.7.indd 11 29-07-09 21:00