Philips HD7765, Manual

Page: 9 / 88

4 Press the on/off button (Fig. 5). The display lights up and the appliance beeps.
5 Press the strength select button (Fig. 4).
6 Turn the control knob to choose the pre-ground coffee setting (Fig. 6). The pre-ground coffee icon
starts flashing.
7 Press the center of the control knob to confirm (Fig. 7).
8 Press the center of the control knob again. The appliance starts the flushing process.
9 Let the appliance operate until the flushing process is finished. It is finished when the appliance
stops beeping.
10 Empty the jug.
11 Press the on/off button to switch off the appliance.
Using the appliance
Filling the water reservoir
There are indications for 2 to 10 cups (275ml to 1375ml) on the water-level window. You can use these
indications to determine how much water to put in the water reservoir. The reflection changes from
light to dark for each cup of water added.
1 Open the water reservoir lid and fill the water reservoir with the required amount of cold water (Fig.
2).
Note: Do not fill the water reservoir beyond the 10-cup indication.
Note: Make sure that the amount of water you pour into the water reservoir is consistent with the
number of cups you want to brew. The coffeemaker uses all the water in the water reservoir.
Using coffee beans
Warning: Always keep the water reservoir lid closed when you fill the coffee bean
container with coffee beans. Otherwise coffee beans can fall into the water reservoir
and block up the water inlet.
1 Open the coffee bean container lid (Fig. 8).
2 Fill the container with coffee beans. Make sure that there are enough coffee beans in the container
for the amount of coffee you want to brew (Fig. 9).
Note: Always make sure that the bean container is at least half full.
Warning: To prevent the grinder from jamming, do not use unroasted or caramelized
beans. Use coffee beans instead of espresso beans, as espresso beans may damage
the grinder.
3 Open the filter basket holder (Fig. 10).
4 Place a paper filter (type 1x4 or no. 4) or the permanent filter in the filter basket (Fig. 11).
5 Close the filter basket holder.
6 Turn the coarseness knob to select the desired type of grind (from fine to coarse). There are nine
grind settings (Fig. 12).
Tip: The coarseness knob allows you to choose between 9 different settings. The icons indicate 3
preselected optimal settings, but you can choose any setting in between. We advise you to
experiment with the different grind settings to find out which setting you prefer.
7 Press the strength button (Fig. 4). The coffee bean icons start flashing.
9
English