Philips HD7446, User Manual

Page: 8 / 144

Let the appliance run until the water tank is empty.
Switch off the appliance when all the water is in the jug.
5 Let the appliance cool down for at least 3 minutes before you start
to brew coffee.
using the appliance
Brewing coffee
1 Open the lid (Fig. 3).
Fill the water tank with fresh cold water (Fig. 6).
The graduations on the left are for large cups (120ml).
The graduations on the right are for small cups (80ml).
Close the lid.
Place the jug on the hotplate.
Make sure you place the jug properly on the hotplate.
Note: If you do not place the jug properly on the hotplate, the drip
stop prevents the coffee from flowing into the jug and the filter. As a result,
the filter may overflow.
5 Open the filter holder (Fig. 7).
6 Take a paper filter (type 1x4 or no. 4) and fold the sealed edges to
prevent tearing and folding.
In some countries, this coffee maker comes with a permanent filter. In
that case, do not use paper filters.
7 Put the filter in the filter holder.
8 Put pre-ground coffee (filter-fine grind) in the filter (Fig. 8).
For large cups: use one heaped measuring spoon of ground coffee for
each cup.
For small cups: use one level measuring spoon of ground coffee for
each cup.
9 Close the lid.
-
-
-
-
EnglisH
8