Philips HD4922, User Manual

Page: 13 / 36

Problem Solution
The timer light does not
go on when I set the
timer.
You have selected the quick-start (manual) mode or the preset hot
pot, stir-fry, boil, or keep-warm mode. You can only use the timer in
the stew, soup/congee, steam-hi and steam-lo modes (see
the ‘Default and adjustable settings’ table in chapter ‘Using the
appliance’).
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
I cannot change the
power setting before I
select the stew mode or
soup/congee mode.
In the stew and soup/congee modes, the appliance first brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
The appliance beeps
continuously.
You have put unsuitable cookware on the cooking plate or you have
removed the cookware from the cooking plate during cooking.
Place suitable cookware on the cooking plate.
The maximum power
setting for certain
cooking modes is very
low.
In the stew and soup/congee modes, the appliance first brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
I cannot switch to a
different cooking mode
during cooking.
You cannot switch to a different cooking mode during cooking. If you
want to select a different cooking mode, press the power on/off
button to switch off the cooker. Then press the power on/off button
again to switch the cooker back on.
The fan works but the
appliance has not started
cooking.
You have to press the start button within 1 minute after you press
the power on/off button. If you do not press the start button within 1
minute, the induction cooker switches off and the fan continues to
work for 1 minute to cool down the appliance.
Codes on the
display
Message What you should do
’--:--’ flashes on
the display
There is no cookware
on the cooking plate or
the cookware is not
suitable for the
induction cooker.
Place suitable cookware on the cooking plate.
E1 Unstable voltage in
power supply network
Check if the voltage in your home is suitable for
the induction cooker.
E2 The cooking plate has
overheated.
Switch off the appliance and unplug it. Let it cool
down for approx. 10 minutes and then switch on
the appliance again.
E3 The appliance
malfunctions
Take the appliance to a Philips dealer or a service
centre authorised by Philips.
EnglisH
1