5
Clean the cutting element with the brush or
rinse it under the tap. Shake off excess water
and leave to dry.
Caution: Do not dry the cutting element with a
towel, as this may damage the cutting element
Caution: Make sure that the cutting element is dry
before you reattach it to the appliance.
6
Clean the inside of the appliance with the
brush.
Never immerse the appliance in water or rinse it
under the tap.
7
To reattach the cutting element, insert the lug
of the cutting element into the guiding slot.
8
Insert the lug of the cutting element into the
guiding slot (1) and push the cutting element
back onto the appliance (2).
Replacement
Only replace a worn or damaged cutting
element with an original Philips cutting element,
available from authorised Philips service centres.
1
Press the release button (1). The cutting
element comes off the appliance (2).
1
2
1
2
ENGLISH
27
HC5432-15_EN_A6_CS6.indd 27
16/05/31 12:27
