Philips GreenPower LED production module 120, Application Manual

Page: 9 / 16

9 September 2018 Application Guide - Philips GreenPower LED production module
F2 M2
Junction box
Power cable for module length 1.5 m | 4.9 ft
1
Junction box
Power cable
for module length
1.5 m | 4.9 ft
Cable tree
1
F1 F1
F2
M2
M1 E1
F2 F2
M2
E2
Connecting the system
Legend
= Female connector for cable tree power cable
= Male connector for cable tree power cable
= End cap for cable tree power cable
= Female connector for cable tree branch or for power cable for module
= Male connector of module
= End cap for cable tree branch cable
= IP66 | UL/CSA dry/damp/wet locations
= NOT IP66 | UL/CSA dry/damp/wet locations
F1
F2
M2
E2
M1
E1
Option 1
Option 2
For connecting the module to the mains power, there are
two options:
Option 1 - Power cable for module
Install the GreenPower LED production module by means of
the GreenPower LED power cable for module.
Option 2 - Cable tree with 2-10 branches
Install the GreenPower LED production module by means of
the GreenPower LED production 2.1 cable tree. Connect this
cable tree to the grid with the GreenPower LED power cable
for cable tree.
Connect all power cables to a junction box. Make sure all
junction boxes are mounted to a rigid structure. Cables must
be secured by a cord grip / strain relief. Use a cord grip
suitable for use with three conductor and type off cord
suitable for the trade size of the junction box provided by
others, if needed.
Any unused connector (both power and data) must be
secured and sealed with an end cap (see ordering data).
Otherwise the IP66 and UL rating for wet locations will
be void.