Philips GoPure GP5611, User Manual

Page: 6 / 40

6 7
4 Operating the Philips car air sanitizer
Once the car’s USB port starts supplying power, the air sanitizer will turn on automatically.
It will operate in low speed mode as the default.
In-car USB DATA port is not
recommended as power input.
Please avoid the use of any USB
port with a power rating lower
than 1.0A, or low-powered car
lighter outlet with an adapter as
the power source.
When input power is lower than
required, product performance
will be compromised.
Do note: The USB ports of some
cars continue to supply power
even when the engine is off. To
avoid running out of batteries, the
air sanitizer is set to automatically
shut down after two hours of
continuous operation. When
the air sanitizer is automatically
turned off after two hours during
driving, turn it on manually if
you wish to turn the air sanitizer
on again.
Do not place the air sanitizer
in places other than the cup
holder to prevent unexpected
product movement, as the car
is moving, that affects safety
whilst driving.
m Precautions
3.2 Installing and connecting the console
Place the air sanitizer in the
cup holder in the center
console or armrest of the car.
1. Press the ON/OFF button to switch into the operating mode
between low speed and high speed.
2. When turned on, press and hold the ON/OFF button for 2 seconds
to shut down the air sanitizer.
3. When turned off, press the ON/OFF button to start and it will
operate in low speed mode as the default.
2S
Use the power cable
provided to connect the
air sanitizer to the car’s
USB port.