10
EN
3 Get
started
Charge power
SDR
has a built-in battery that can be charged
through the USB port of a computer.
As shown, connect the
SDR
to a PC by using
the USB cable.
Note
%
When you connect
SDR
#<!#{!
prompted to select:
[Charge & transfer]
or
[Charge
& play]
. If no option is selected,
[Charge & transfer]
applies.
%
To play the
SDR
when you charge power, select
[Charge & play]
.
Battery level indication
%
When the battery is low, the low battery
screen is displayed repeatedly.
%
When the charging process is complete,
is displayed.
Note
%
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
To conserve battery power and increase the
play time, do the following on SDR:
%
Set the backlight timer to a low value (go
to >
[Display settings]
>
[Backlight
timer]
).
Switch the player on or off
Press and hold / until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.
Insert a Micro SD card
On
SDR
, insert a Micro SD card (up to 16 GB).
}_<!#
of
SDR
.
