Philips Geometricks 10 in 1 HP4698, Owner'S Manual

Page: 13 / 148

troubleshooting
If problems should arise with your styler and you are unable to solve
them by means of the troubleshooting guide below, please contact a
Philips service centre or the Philips Customer Care Centre in your
country.
Problem Solution
The appliance
does not work
at all.
Perhaps there is a power failure or the socket is
not live.
Check if the power supply is working. If it is, check
whether the socket is live by plugging in another
appliance.
Perhaps the appliance overheated and switched
itself off.
Unplug the appliance and let it cool down for a few
minutes.
Make sure that the voltage indicated on the
appliance corresponds to the local mains voltage.
Perhaps the mains cord of the appliance is
damaged.
The mains cord must be replaced by Philips, a
service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
The styling
results are
not what you
expected.
Perhaps you didn’t let the appliance heat up long
enough.
Let the appliance heat up until the ready dot has
changed colour.
EnglisH
1