Philips Geometricks 10 in 1 HP4698, Owner'S Manual

Page: 10 / 148

Take a lock of hair, open the clip by pressing the lever and place the
lock between the barrel and the clip. (Fig. 9)
Release the lever and slide the barrel to the end of the lock. Then
wind the lock round the barrel.
Make sure that the end of the lock is wound in the required direction.
Open the clip after 5 to 10 seconds and remove the barrel from
the hair. Let the triangular curls cool down before combing,
brushing or finger-combing the hair into its final style.
Zig-zag curls
1 Connect the zig-zag attachment to the handle. Make sure that the
stand is pointing downwards.
Take a lock of hair, open the clip by pressing the lever and place the
lock between the barrel and the clip. (Fig. 10)
Make sure that the end of the lock is wound in the required direction.
Open the clip after 5 to 10 seconds and remove the barrel from
the hair. Let the zig-zag curls cool down before combing, brushing
or finger-combing the hair into its final style.
Crimps
1 Connect the crimping/straightening attachment with crimping
plates to the handle. (Fig. 11)
Take a lock of hair (max. 5 to 6 cm wide), open the attachment
by pressing the lever and place the lock between the plates of the
crimping/straightening attachment. Start crimping at the roots.
(Fig. 1)
Keep the plates locked for 5 to 10 seconds.
Open the attachment by pressing the lever and place a lower
section of the same lock of hair between the plates. Make sure
there is an overlap. Repeat this process until you have reached the
end of the lock.
EnglisH
10