background image

www.philips.com

4239.000.7307.2

u

Important

Read this user manual carefully before you use the appliance and 

save it for future reference.

Danger

 

,

Never immerse the iron, the steamer or the appliance in 

water.

Warning

 

,

Check if the voltage indicated on the appliance corresponds 

to the local mains voltage before you connect the appliance.

 

,

Do not use the appliance if the plug, the mains cord, the 

supply hoses or the appliance itself shows visible damage, or if 

the appliance has been dropped or is leaking.

 

,

If the mains cord or the supply hoses of this appliance are 

damaged, you must have them replaced by Philips, a service 

centre authorised by Philips or similarly qualified persons in 

order to avoid a hazard. 

 

,

Never leave the appliance unattended when it is connected 

to the mains.

 

,

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have 

been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

 

,

Children should be supervised to ensure that they do not play 

with the appliance.

 

,

Never let the mains cord and supply hoses come into contact 

with the hot soleplate of the iron.

 

,

If steam escapes from the rinse tray during use, switch off the 

appliance and contact a service centre authorised by Philips. 

Caution

 

,

Only connect the appliance to an earthed wall socket.

 

,

Check the cord and the supply hoses regularly for possible 

damage.

 

,

Never remove the ironing board cover while ironing or 

immediately after use. Always let the appliance cool down 

sufficiently before you remove the cover.

 

,

The soleplate of the iron can become extremely hot and may 

cause burns if touched.

 

,

When you have finished ironing/steaming, when you clean the 

appliance and also when you leave the appliance even for a 

short while, remove the mains plug from the wall socket.

 

,

Do not move the appliance while it is in use. 

 

,

Do not use the appliance with very wet fabrics.

 

,

Always place and use the appliance on a stable, level and 

horizontal surface.

 

,

Do not put a cloth, sheet or any other cover over the 

appliance immediately after use.

 

,

Always transport the appliance in storage position with the 

ironing board folded and the locking strap properly secured.

 

,

This appliance is intended for household use only. Do not 

expose the appliance to atmospheric agents (e.g. rain, sun, 

cold).

Type of water to be used

 

,

Do not put perfume, vinegar, starch, descaling agents, ironing 

aids or other chemicals in the water tank.

 

,

You can use normal tap water. If the tap water in your area is 

very hard, we advise you to mix it with an equal amount of 

distilled water.

Environment

Do not throw away the appliance with the normal 

household waste at the end of its life, but hand it in 

at an official collection point for recycling. By doing 

this,  you help to preserve the environment.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding 

electromagnetic fields (EMF). If handled properly and according 

to the instructions in this user manual, the appliance is safe to use 

based on scientific evidence available today.

Guarantee and service

If you need service or information or if you have a problem, 

please visit the Philips website at 

www.support.philips.com

 

or contact the Philips Consumer Care Centre in your country 

(you find its phone number in the worldwide guarantee leaflet). 

If there is no Consumer Care Centre in your country, go to your 

local Philips dealer.

Summary of Contents for GC9930/07









Reviews: