Philips GC4400 series, User Manual

Page: 14 / 224

Repeat the Calc-Clean process if the iron still contains a lot of impurities.
after the Calc-Clean process
1 Put the plug back into the wall socket and let the iron heat up to
let the soleplate dry.
2 Unplug the iron when it has reached the set ironing temperature.
3 Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.
storage
1 Set the steam control to position 0 and unplug the iron.
2 Empty the water tank (Fig. 16).
3 Let the iron cool down in a safe place.
4 Wind the mains cord and fix it with the cord binder. (Fig. 17)
5 Store the iron on its heel on a stable surface.
Heat-resistant protective cover (specific types only)
You can store the iron on the heat-resistant protective cover immediately
after ironing. It is not necessary to let the iron cool down first.
Do not use the heat-resistant protective cover during ironing.
1 Put the iron on the heat-resistant protective cover (Fig. 18).
2 Insert the tip of the soleplate into the heat-resistant protective
cover (1) and then press down the heel of the iron (2).
environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 19).
EnGlish
14
4239.000.6443.6.indd 14 21-10-09 14:11