Philips GC3500 series, User Manual

Page: 11 / 192

Drip stop (specific types only)
This iron is equipped with a drip-stop function: the iron automatically
stops producing steam when the temperature is too low, to prevent
water from dripping out of the soleplate. When this happens you may
hear a sound.
Automatic shut-off function (specific types only)
The automatic shut-off function automatically switches off the iron if it
has not been moved for a while.
,
The red auto-off indication of the temperature light flashes to
indicate that the iron has been switched off by the automatic
shut-off function (Fig. 6).
To let the iron heat up again:
1 Pick up the iron or move it slightly
,
The red auto-off indication goes out.
,
If the temperature of the soleplate has dropped below the set
ironing temperature, the amber temperature light goes on.
2 If the amber temperature light goes on after you have moved the
iron, wait for it to go out before you start ironing.
Note: If the amber temperature light does not go on after you move the iron,
the soleplate still has the right temperature and the iron is ready for use.
Cleaning and maintenance
Cleaning
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
2 Wipe flakes and any other deposits off the soleplate with a damp
cloth and a non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the soleplate.
3 Clean the upper part of the iron with a damp cloth.
ENGLISH
11
4239_000_8219_2_DFU Booklet_A6_v1.indd 11 18/07/14 14:06