19
English
AUX/ SLEEP/ RESET
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your system’s speakers.
1
Check the external device has been properly
connected. (See
Installation, Connecting an
additional appliance
)
2
Press
STANDBY-ON
to on, then press
AUX
to select AUX mode.
➜
Display shows :
3
To avoid noise distortion, turn down the volume
on your external device.
4
Press the
PLAY
key on the connected device to
start playback.
5
To adjust the sound and volume, use the sound
controls on your external equipment and the
FWC 5.
SLEEP
You can set a certain period of time after which
the set will switch to standby.
1
Press
SLEEP
repeatedly to select the desired
time period options (in minutes):
➜
Display shows in sequence:
SLP 10, 20, 30,
40, 50, 60, 70, 80, 90, 00.
➜
Display shows the selected option briefly and
returns to its previous status.
2
To view the time countdown to the standby
mode, press
SLEEP
again.
To deactivate the sleep timer, press SLEEP until
SLP 00
is display or press
STANDBY-ON
to
switch the system to standby.
RESET
RESET
If desired, you can restore your system to its
default setting.
1
Remove the power plug from the wall socket.
2
Use a ballpoint pen to press the RESET for
more than 30 seconds.
3
Reconnect the power plug .
➜
AM
flashes.
➜
The system is restored to its default setting.
STANDBY ON
