16
English
Radio Reception
Tuning to radio stations
1
Press
STANDBY-ON
to on, then press
TUNER•BAND
to select TUNER mode.
➜
Display: the waveband, radio station
frequency and if programmed, a preset number
are shown.
2
Press
TUNER•BAND
once or more to select
your waveband: FM or AM (MW).
3
Press and hold
4
or
¢
until the frequency
in the display starts running.
➜
The radio automatically tunes to a station of
sufficient reception.
➜
If a FM station is received in stereo,
STEREO
is shown.
4
Repeat step
3
if necessary until you find the
desired radio station.
●
To tune to a weak station, press
4
or
¢
briefly and repeatedly until optimal reception is
found.
●
To tune to a weak FM station, press
STEREO
•
MONO
once or more until
MONO
appears on the display.
Storing preset radio stations
You can store up to 32 preset radio stations in
the memory (20 FM and 12AM).
1
Tune to your desired radio station (see “Tuning
to radio stations”).
2
Press
PROGRAM
to activate programming
.
(or
PROG
on the remote control)
➜
Display shows: current radio frequency and
CH
.
--
flashes for you to enter a preset number.
3
Press
PRESET
•
REPEAT
to select a preset
number.
4
Press
PROGRAM
to confirm.
5
Repeat steps
1-4
to store other stations.
Helpful hints:
– You can erase a preset station by storing
another frequency in its place.
To listen to a preset station
●
Either press
PRESET
•
REPEAT
once or more
until the desired preset station is displayed.
●
Or press
digits
0 - +10
on remote control to
select the desired preset station. e.g.
Preset 3: Press 3
Preset 10: Press +10 and then, 0
Preset 13: Press +10 and then, 3
Preset 20: Press +10, +10 and then, 0.
STANDBY-ON
