background image

21

English

3139 115 21171

General Information on
Recording

For recording, use only tape of IEC type I
(normal tape).

The recording level is set automatically, regardless
of the position of the Volume, VAC, DSC and so
forth.

The tape is secured at both ends with leader
tape.  At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.

To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.

If  “

CHECK TAPE

” is displayed, the protection

tab has been broken.  Put a piece of clear
adhesive tape over the opening.

   

IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.

Preparation for Recording

1

Press 

TAPE 

(TAPE 1•2) to select TAPE 2.

2

Load a recordable tape into tape deck 2 with full
spool to the left.

3

Prepare the source to be recorded.

CD

 – load the disc(s).

TUNER

 – tune to the desired radio station.

TAPE

 – load the prerecorded tape into tape

deck 1 with the full spool to the left.

AUX

 – connect external equipment.

When recording is in progress

 starts flashing.

It is not possible to listen to another sources
except when dubbing tapes.

It is not possible to activate the timer function.

One Touch  Recording

1

Press 

CD

TUNER

 

or 

AUX 

to select the

source.

2

Start playback of the selected source.

3

Press 

REC

 to start recording.

To stop recording

Press 

Ç

 on the system.

Note:
– One Touch Recording is not possible in TAPE
mode, "

SELECT SOURCE

" will be displayed.

CD Synchro Recording

1

Press 

CD 1

2

3

 

to select the disc.

Press 

í

 or 

ë

  to select the desired track to

start recording.

You can programme the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).

2

Press 

REC

 to start recording.

The disc will start playback automatically.

To select another track during recording

1

Press 

PAUSE

Å

  to interrupt recording.

2

Press

í

 or 

ë

 to select the desired track.

3

Press 

PLAY

É

  to resume recording.

To stop recording

Press 

Ç

.

Recording and disc playback will stop

simultaneously.

Tape Operation/Recording

pg 001-027/C788/21-Eng

12/11/01, 5:29 PM

21

Summary of Contents for FW-C788/21





























Reviews: