3139 115 20111
15
English
TUNER
Note:
– For 'EASY SET' feature, please refer to
page 10.
Tuning to radio stations
1
Press
TUNER
(BAND) to select TUNER
mode.
™
“
TUNER
” will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2
Press
TUNER
(BAND) again to select
the desired waveband : FM, MW or LW.
3
Press
à
or
á
for more than one
second, then release.
™
The display will show “
SEARCH
”
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
à
or
á
repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1
Press
TUNER
(BAND).
2
Press
PROGRAM
for more than one
second.
™
The
PROG
flag starts flashing and
“
AUTO
” will be displayed.
™
The system will search for every
available station in the FM waveband
first, then search the MW and LW
bands respectively.
™
All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™
The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1
Press
TUNER
(BAND).
2
Press
TUNER
(BAND) again to select
the desired waveband : FM, MW or LW.
3
Press
PROGRAM
for less than one
second.
™
The PROG flag starts flashing.
™
The next available preset number will
be displayed for selection.
4
Press
à
or
á
to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press
4
or
3
to
select the desired preset number.
5
Press
PROGRAM
again.
™
The PROG flag disappears and the
radio station will be stored.
• Repeat
steps 3 – 5
to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
PROGRAM FULL
”. If you want to
change an existing preset number,
repeat steps 3 – 5.
– You can cancel manual programming by
pressing
Ç
(on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Untitled-70
12/12/00, 6:47 PM
15
