3139 115 20111
13
English
CD
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable and
finalized digital audio CD-Rewritable
format discs.
Loading the CD Changer
1
Press
CD
to select CD mode.
2
Press
OPEN•CLOSE
.
™
The CD carousel tray slides out.
3
Load a CD with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC
CHANGE
button.
™
The CD carousel tray will rotate until
the empty tray is ready for loading.
4
Press
OPEN•CLOSE
to close the CD
carousel tray.
™
The total number of tracks and the
playing time of the selected disc
appear on the display.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
CD Direct Play
• You can play a CD directly by pressing
the
DISC 1
,
DISC 2
or
DISC 3
button.
The CD player will stop at the end of
playback of the selected disc.
™
A lit button indicates that a disc is
loaded in the disc tray.
™
A flashing button indicates that a
disc is playing.
Playing a CD
1
Press
É
to start playback.
™
The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, press
Å
.
™
The playing time flashes.
• To resume playback, press
É
again.
2
To stop playback, press
Ç
.
Note:
– All the available discs will play once,
then stop.
Disc Change
You can change the outer two discs while
the third inner disc is stopped or is playing.
1
Press
DISC CHANGE
.
™
The CD carousel tray slides out.
2
Replace the discs in the left and right
disc trays.
• If you press
DISC CHANGE
again
during playback, the CD will stop
playing.
™
The CD carousel tray will rotate until
the inner tray is rotated out and is
ready for changing.
3
Press
OPEN•CLOSE
to close the CD
carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1
Press
í
or
ë
until the desired track
appears on the display.
2
Press
É
to start playback.
™
The selected track number and
elapsed playing time appear on the
display.
Selecting a desired track during
playback
• Press
í
or
ë
until the desired track
appears on the display.
™
The selected track number and
elapsed playing time appear on the
display.
• If you press
í
once it will skip to the
beginning of the current track and play
the track again.
Note:
– Pressing
í
during shuffling can only
skip to the beginning of the current
track.
Searching for a particular
passage during playback
• Press and hold
à
or
á
until the
desired passage is located.
™
The volume will be reduced.
• Play returns to normal when
à
or
á
is released.
Programming Tracks
Programming tracks of a loaded CD is
possible when playback is stopped. The
display will indicate the total tracks stored
in the program. Up to 40 tracks can be
stored in the memory in any order. When
40 tracks are stored and you attempt to
store another track, the display will show
“
PROGRAM FULL
”.
1
Load the desired discs in the disc trays.
2
Press
PROGRAM
to start programming.
™
The
PROG
flag starts flashing.
™
It will cancel any previously selected
repeat mode.
3
Press the
CD
(CD 1•2•3) or
DISC 1/2/3
button to select the disc.
4
Press
í
or
ë
to select the desired
track.
5
Press
PROGRAM
to store the track.
• Repeat steps
3
to
5
to store other discs
and tracks.
6
Press
Ç
once to end programming.
™
The total number of tracks
programmed and total playing time
appear on the display.
Untitled-70
12/12/00, 6:47 PM
13
