17
English
3140 115 29741
Random play
1
Press
SHUFFLE
on the remote control.
➜
SHUF
is shown and "
SHUFFLE
" is displayed.
➜
All the available discs or programmed tracks
(if programme is active) will be played in random
order.
2
To resume normal playback, press
SHUFFLE
again.
➜
SHUF
disappears.
Notes:
– During programme play or shuffling mode, it is
not possible to repeat playback the current disc
(Repeat Disc mode).
– Pressing the OPEN/CLOSE button will cancel all
repeat and shuffling modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press
PROG
to start programming.
➜
PROG
starts flashing.
3
Press
CD 1/2/3
to select a disc.
4
Press
í
or
ë
repeatedly to select the desired
track.
5
Press
PROG
to store the track.
●
Repeat
steps 3–5
to store other discs and
tracks.
6
To end programming, press
Ç
once
.
➜
PROG
stays and the programme mode
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
7
To start programme play, press
ÉÅ
.
➜
"
PLAY PROGRAM
" is displayed.
Notes:
– If the total playing time is more than "
99:59
"
or if one of the programmed tracks has a number
greater than 30, then "
--:--
" is displayed
instead of the total playing time.
– If you attempt to programme more than 40
tracks, "
FULL
" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and press
í
or
ë
repeatedly.
●
To exit review mode, press
Ç
.
Erasing the programme
●
Press
Ç
once
when playback is stopped or
twice
during playback.
➜
PROG
disappears and "
PROGRAM CLEARED
"
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
CD Operation
