13
English
3140 115 29741
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
●
In standby mode
, press and hold
Ç
on the
system until "
WELCOME
" is displayed.
➜
The demonstration will begin.
To deactivate the demonstration
●
Press and hold
Ç
on the system until
"
DEMO OFF
" is displayed.
➜
The system will switch to standby mode.
Switching the system on
In standby/demonstration mode
●
Press
STANDBY ON
to switch on the last
selected source.
●
Press
CD 1/2/3
,
TUNER
,
TAPE
(
TAPE 1/2
)
or
AUX
(AUX/CDR)
.
●
Press
OPEN/CLOSE
.
➜
The system will switch to CD mode.
In Eco Power standby mode
●
Press
ECO POWER
to switch on the last
selected source.
●
Press
CD 1/2/3
,
TUNER
,
TAPE
or
AUX
on
the remote control.
Switching the system to standby
mode
In demonstration mode
●
Press and hold
Ç
on the system.
In any other source mode (except Eco
Power standby mode)
●
Press
STANDBY ON
(or
B
on the remote
control).
➜
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 0.5 Watt)
●
Press
ECO POWER
(or press and hold
B
on
the remote control).
➜
"
ECO PWR
" is displayed, then the display
screen will go blank.
➜
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
Dim mode
You can select the desired brightness for the
display.
●
In any source mode (except standby and Eco
Power standby mode), press
DIM
repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
➜
DIM
is shown, except for DIM OFF mode.
DIM
mode
1
2
3
OFF
Brightness
normal
half
half
normal
Spectrum
Analyser
off
on
off
on
Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Basic Functions
