English
3139 116 19341
21
TIMER
SLEEP TIMER
5
Press
CLOCK•TIMER
again to store the
setting.
™
The clock starts.
• To exit without storing the setting, press
Ç
on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
To set the time with RDS clock, see
"Receiving RDS Radio Station" under
TUNER section.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
•
The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
to select timer mode.
™
“
12
:
00
AM
” or “
00
:
00
" or the last
timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™
The
TIMER
starts flashing.
™
The selected source is lit while other
available sources are flashing.
2
Press
CD
,
TUNER
or
TAPE
to select the
desired source.
• Before selecting CD or TAPE, make sure
a CD or tape is loaded in the CD tray or
tape deck 2.
3
Press
à
or
á
on the system to set the
hour for the timer to start.
4
Press
í
or
ë
on the system to set the
minute for the timer to start.
5
Press
CLOCK•TIMER
to store the start
time.
™
The timer is now set.
™
The
TIMER
remains on the display.
• At the preset time, the timer will be
activated.
™
The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, the TUNER will be selected
instead.
– The timer will not activate if a recording
is in progress.
To switch off the TIMER
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
.
2
Press
Ç
on the system to cancel the
timer.
™
The timer is now switched off.
™
The display will show "
CANCEL
"
and the
TIMER
disappears.
To start the TIMER again
(for the same
preset time and source)
1
Press and hold
CLOCK•TIMER
for more
than
2 seconds
.
2
Press
CLOCK•TIMER
again to store the
start time.
™
The timer is now on.
™
The
TIMER
appears on the display.
Sleep Timer
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1
Press
SLEEP
on the remote control
repeatedly to select a period of time.
™
The selections are as follows (time in
minutes):
60
™
45
™
30
™
15
™
OFF
™
60
…
™
“
SLEEP XX
” or “
OFF
” will be
displayed. "
XX
" is the time in
minutes.
2
When you reach the desired length of
time, stop pressing the
SLEEP
button.
™
After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
• Press
SLEEP
repeatedly until "
OFF
" is
displayed, or press the
STANDBY ON
button.
pg 01-24/C28/34-Eng
2/23/00, 8:06 AM
21
