Mechanical Instructions
4.
4.
Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Assy/PWB Removal
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassemble instructions in described order.
•
All photo’s are made of the 50” SDI model, however the 42”
model will not deviate much from it.
•
Follow the disassemble instructions in described order.
•
Be aware that the internal (gold coloured) frame is made of
conducting material. So, be cautious during electrical
measurements!
4.1
Cable Dressing
4.1.1
Chassis
Figure 4-1 Chassis cable dressing
F_15740_020.eps
101005
