Philips Expanium AZ 5150, Service Manual, Page: 9 / 32

3 - 5
CD/VCD/MP3-CD
English
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order (except for MP-3 CD). 1.
In stop mode, press
PROGM
to enter programme setting.
PROG
will start flashing.
2.
Press
digits 0 - 9, +10
on the remote control or
/
to select the desired track.
3.
Press
PROGM
to store the select track.
•
Repeat steps
1
to
3
to store other tracks.
4.
Press
to end programme setting.
PROG
will remain on the display
.
•
Press
or
on the set (or on the remote control, press
or
) in stop mode to review the
programme sequence.
5.
Press
to play the programmed tracks.
•
If you press REPEA
T during programme playback, the current track or all programmed tracks will be
played repeatedly
.
REPEA
T/REPEA
T ALL
and
PROG
will appear on the display
.
6.
Press
in stop mode to clear the programme.
PROG
will disappear from the display
.
Notes : -
""
represents PROGRAMME and "
" represents TRACK, "
" is the current selected
Programme or T
rack number
.
-
The programming is automatically cleared as soon as the CD compartment is opened.
-
The function of programme setting is disable in PLA
Y/P
AUSE mode.
-
Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks from such a VCD.
For MP3-CD only 1.
In stop mode, press
PROGM
.
PROG will start flashing and "
" will be displayed.
On TV screen, "PXX AXX TXX?" and "PROGRAM" will be displayed.
2.
Press and hold
/
to select the desired ALBUM and press
/
repeatedly (or
digits 0 -
9, +10
on the remote control) to select the desired TRACK for programming.
3.
Press
PROGM
to store the select track.
""
will show on the display screen and "
" on TV screen.
PROG
will remain on the display
.
•
Repeat steps
1
to
3
to store other desired album and track.
•
Press
or
in stop mode can review the programme sequence.
""
will show on TV screen.
•
Press
/
in stop mode to show the programme information.
The Album's number and T
rack's number will show on the display screen.
4.
Press
to start programme playback. Y
ou can press
/
to select the programmed track to
play
.
5.
Press
once
stop programme playback or
twice
to clear the programme.
PROGRAMMING TRACKS
2;
2 9
9 9
§
§
§
§
§
§
§
∞
∞
∞
∞
∞
∞
∞
¡
™
XX
XX
OK
XX
™ ™ ™ ™ ™ ™ ™ ™ ™
™
P
P
XX
P
XX
R
XX
X
T
T
01
CD/VCD/MP3-CD
English
You can play all the tracks in random order
.
1.
During playing, pause or stop mode, press
SHUFFLE
to enable SHUFFLE play mode.
SHUFFLE
will appear on the display
.
2.
To
exit shuffle mode, press
SHUFFLE
again or
.
SHUFFLE
will disappear from the display
.
Note : -
If the Shuffle function enabled, and the Repeat function is set on, will disable the Shuffle play mode.
You can play the current track or the whole disc repeatedly
.
1.
During CD Playing or Pause mode, press
REPEA
T
on the set or remote control.
REPEA
T
- to repeat the current track.
REPEA
T ALL
- to repeat the whole disc.
•
For MP3-CD, you are able to select REPEA
T,
REPEA
T ALL or REPEA
T ALB mode.
REPEA
T ALB
- to repeat the current album.
•
The current track or whole disc will now be played repeatedly until you press
.
2.
To
exit the repeat mode, press
REPEA
T
until the
REPEA
T/REPEA
T ALL/REPEA
T ALB
disappears from the display
.
Notes : -
If the Repeat function is enable, and the Shuffle function is set on, will disable all the Repeat play modes.
-
If the Repeat function is enable, and the Stop button is pressed, will disable all the Repeat play modes.
-
In programme mode, you can only select Repeat or Repeat All function.
Adjusting the TV System
Before viewing the V
ideo CD, ensure that the set is switched to corresponding P
AL or NTSC system
of your TV set (exception Multi - system TV). 1.
Set the colour system selector to the
P
AL/A
or
NTSC/B
position as default setting. After TV system is selected, the set will automatically switch to the default setting every time the VCD source is selected.
2.
On the remote control,
press
NTSC/P
AL
to switch between NTSC
and P
AL TV system.
OSD - On Screen Display
If you insert VCD/CD, your TV screen will serve as an additional display for messages (e.g. PLA
Y,
STOP), and information stored on the VCD/CD. •
Press OSD on the remote control to select viewing various information.
The current track and current /remaining time in the track/disc appear on the display
.
P
AL / A
NTSC / B
...
. ..
OSC
1 2 3
VIDEO CD REPEA
T
SHUFFLE
9
9
™ ™ ™ ™ ™ ™
INSTRUCTIONS FOR USE