Philips EBJ1.0U, Service Manual

Page: 10 / 166

Mechanical Instructions EN 10 EBJ1.0U 4.
4.1.7 Medium Signal Board Removal (MSB)
1. Remove lower centre back cover.
2. Disconnect all cables from the MSB.
3. Remove all fixation screws [1] from the MSB and pull the
tab [2] on the right hand side of the MSB.
4. Lift the right side of the MSB and slide the panel up and out.
Figure 4-8 Medium signal board
4.1.8 Small Signal Module Removal (SSM)
1. Remove lower centre back cover.
2. Remove screws [1], holding the plastic cover [2] of the
connectors.
3. Remove plastic cover [2].
4. Loosen all connectors [3].
5. Release the clips [4] and remove the ventilation grid from
the left side.
6. Remove screw [5], keeping the SSB module in place.
7. Lift catch [6] and remove the SSB module by pulling it to the
rear.
Figure 4-9 Small signal module 1/4
Figure 4-10 Small signal module 2/4
Figure 4-11 Small signal module 3/4
G_15860_063.eps
100406
1
G_15860_066.eps
100406
1
1
1
1
2
1
1
1
1
G_15860_067.eps
100406
3
3
3
G_15860_068.eps
100406
4
4
4
6