• For On or Off of numbered bulb press selected number On or Off
• For dimming of numbered bulb press selected number On before rotating
• For instant full brightness of numbered bulb, double press selected number On
Before first use of EasyScene, the remote control and individual EasyScene bulbs must be connected in order to
operate together. It is not necessary to point the remote control at the lamp. Please follow steps below to connect.
Philips EasyScene gives you wireless control of your lights from a convenient remote control. Simply change
your existing lightbulbs to EasyScene energy savers to enjoy complete control of your lighting, including
dimming, at your fingertips.
Note : If connecting does not occur as normal, switch the bulb off and on again and retry connecting steps above.
YOUR EASYSCENE IS NOW READY FOR USE.
Easy control at your fingertips
Setup Instructions
Using numbered EasyScene bulbs
Examples of numbering bulbs
1. Bulb should be switched on.
2. Quick press
3. A bulb will blink to show that it selected. If the bulb you want to select is not blinking, press again to cycle
through bulbs until the correct one blinks.
4. Press of the number that you want to assign bulb while bulb is still blinking.
5. The bulb will flash to confirm successful numbering
Note : If you mistakenly press a bulb will start blinking. Leave for 10 seconds or press any other button
(eg. dimming dial) to stop the bulb blinking. Take care not to unintentionally re-number bulb.
Numbering EasyScene bulbs
IMPORTANT
STEP 1
Open the battery compartment
on the back of the remote control
and insert 2 AAA batteries.
Usage Instructions
• For All On press or for All Off press
• For dimming of all bulbs press before rotating
• For instant full brightness of all bulbs, double press
STEP 2
Switch off power for selected light
fitting before installing bulb, then
switch power on.
STEP 3
Hold for 3 seconds until bulb
flashes confirming connection with
remote control.
EXAMPLE 1
EXAMPLE 2
EXAMPLE 3
2 AAA Batteries
1 EasyScene Remote Control
Pack contents
AA
A
AA
A
2 EasyScene Bulbs
Dimming dial
All On button
All Off button
Select button
Number On button
Number Off button
1
2
3
4
PHILIPS
1
2
3
4
PHI
LIPS
reset
PH
ILIPS
PH
ILIPS
C
M
Y
CM
MY
CY
CMY
K
QSG.ai 1 70.71 lpi 45.00° 15/05/2009 1:57 PM
QSG.ai 1 70.71 lpi 45.00° 15/05/2009 1:57 PM
Process Black
Process Black
