24
25
Triggering: The deadbolt works abnormally.
The door cannot be locked or unlocked.
Alarm mode: Continuous repeated alarms.
Turning off: The alarm will be automatically
turned off.
How to replace batteries
When the battery voltage is insufficient, and
the door cannot be opened from the outside,
you can power the lock through the Micro
USB interface by using a 5V power bank as
an emergency power supply. After opening
the door lock, please replace the batteries
immediately.
How to apply an emergency power
Deadbolt abnormity alarm
Anti-dismantle alarm
The lock is powered by four 1.5V alkaline
batteries. There are two sets of working
power inside the battery case. Eight
batteries can be put in to extend the
battery life and reduce battery replacement
frequency. The battery cabinet is located
at the upper end of the inside escutcheon.
By pushing the battery cover upwards, you
can remove the battery cover and then the
batteries.
Emergency
power interface
Triggering 1:
The door is pried open and the sensor
latch bolt pops up.
Alarm mode:
Continuous repeated alarms.
Turning off:
The alarm can be turned off
automatically or by a successful verification.
Triggering 2:
Outside escutcheon is pried open
and there is no fit to the door.
Alarm mode:
Continuous repeated alarms.
Turning off:
Auto-close, or close after a
successful key verification, or close after the
normal indoor unlock.
Summary of Contents for EasyKey
Page 1: ......
