background image

18

19

Deadlock from inside

Mechanical key opening

After the door is locked, long press the [Close] 

button. The button will flash once in red and 

there will be a voice prompt of “Inside deadlock 

enabled”.

When under inside deadlock mode, the 

infrared sensing function will be disabled, and 

all functions of the outside escutcheon will 

be locked. If you try to wake up the system 

manually, the keypad area will display the 

combination of “15937(X)” and there will be 

a voice prompt of “Inside deadlock enabled” 

reminding you that the door has been dead 

locked from inside.

Under deadlock mode, all operations of the 

outside escutcheon are disabled. Master PIN 

code verification or mechanical key opening 

is required to release the door from deadlock 

mode. 

Cut the box and take 

out the key shell. 

Push the cover aside 

and reveal the key 

itself.

Insert the key itself 

into the key hole and 

keep the key and key 

shell vertical to each 

other. Rotate the key 

shell towards the 

handle for 90° until it 

becomes close to the 

door surface.

Rotate the key shell 

downwards for 180° 

to make the key shell 

parallel to the ground. 

Then rotate the key 

shell horizontally 

towards the handle to 

unlock the door. 

Push button

1

2

3

It is suggested that  not to use the mechanical key for daily unlocking. Use the key  

for emergencies only, i.e. when the battery is running out, when the PIN code is 

forgotten, or when the system fails to work properly.

Safe handle function: Lock the handle from inside

Function:

Lock the handle from inside and prevent 

unlocking from inside.

How to use:

1. Enable safe handle function: Toggle the 

switch to red scale.

2. Disable safe handle function: Toggle the 

switch to green scale.

6  Other functions

Restore factory settings: one button to restore to 

factory settings

Function:

 

Empty all user information and return to 

factory settings.

How to use:

Long press the [RES] button for 5 seconds,and 

all the user information will be emptied. The 

lock will be restored to factory settings.

Attention

Attention

Safe 

handle 

switch

Summary of Contents for EasyKey
















Reviews: