masking regions from motion detection
DUS704C Instruction Manual Rev H.docx
4
It is possible to reduce the field of view of the DUS804C from its normal 360
0
by use of the in-built rotating
pull out shield. The shield blocks 120
0
of the field of view, reducing the motion detection field to 240
0
. The
shield can also be rotated to block any 120
0
area once the sensor has been installed.
specifications
DUS704C Instruction Manual Rev H.doc. Specifications and design subject to change without notice.
Philips Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921). Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333
Web:
Philips.com/dynalite
Motion Detector
360
O
Ceiling Mount PIR Detector
Range 9m x 6m ellipse (at a height
of 2.4m)
Mounting height: 2.1m to 4.0m, 2.4m optimum
LED activation indicator
Adjustable Pulse Count & Sensitivity
Detection zones: 34 dual element zones
Sensor: Dual element pyro-electric
R.F.I. Immunity: >15V/m @ 10- 1000MHz
PE Cell
Dynamic range < 5 lux to > 5000 lux
Automatic “Daylight Harvesting” mode
Can be used for light measurement
Infra Red Remote Control Receiver
Range > 6m
LED activation indicator
Can be used with DTK500 series Infra Red
remotes or other learning IR Remote controls
Installation Position
Ceiling mount, indoor use only
Dimensions
102mm diameter x 30mm
Control IO
Serial Port
– RS485 DyNet
DyNet DC Load
20mA
Setup
All functions remotely programmable
Weight
0.1Kg Packed
