10
4.3 On Set-top box side:
Use OSD to upgrade s/w. Then you see
“
C C C C ...
”
shown on PC Hyperterminal
screen.
4.5 On PC side:
Enter Hyper terminal menu, “ Transfer” -> “Send file” -> “BROWSE”, and select new
software file (set protocol in
1K Xmodem
)-> press “Send”
Ps. Set-top-box will wait PC to transmit the s/w. If you doesn
’
t send file to box, it will
timeout then exit the upgrade status. You should redo these actions again.
“Transfer” -> “Send file” -> “BROWSE”, and select new software file (set protocol in
1K Xmodem)-> press “Send”
6. When s/w update completed, the box will shut down automatically.
7. Restart box, it will boot up with new software.