2-1
2-1
DISMANTLING INSTRUCTIONS
Dismantling of the DVD Loader
1) The tray can be manually open by inserting a minus
screw driver and push the lever in the direction as shown
in Figure 1 to unlock the tray before sliding it out.
2) Slide out the tray and remove the Tray Front assembly
(pos 110 + pos 111) as shown in Figure 2.
1) Loosen 2 screws F (see Figure 4) and 2 screws G (see
Figure 5) at the bottom to detach the Front Cabinet
assembly from the Bottom Frame (pos 161) by sliding it out
towards the front.
- see Service position C
2) The Card Reader (pos 175) can be detach from the Front
Cabinet assembly by pushing in the direction as shown
in Figure 6 to loosen it before sliding it out in the direction
as shown in Figure 7.
Detaching the Front Cabinet assembly and the Card Reader
3) Loosen 5 screws to remove the Cover Top (pos 240).
- 1 screw each on the left & right side
- 3 screws on the rear
4) Loosen 4 screws B (see Figure 4) to remove the DVD
Loader.
Figure 7
Figure 3
Figure 2
Figure 1
1) Loosen 8 screws A (see Figure 3) and uncatch 2 catches
C1 (see Figure 4) to remove the AV Board (pos 1001).
2) Loosen 4 screws D (see Figure 4) to remove the SD6.1
PL 2CH Board.
Dismantling of the AV Board, SD6.1 PL 2CH Board and PSU Board
3) Loosen 2 screws E and uncatch 2 catches C2 (see Figure
4) to remove the PSU Board (pos 1004).
Figure 5
Figure 6
Figure 4
