15
•
[All]
- Support multi-channel audio
formats.
•
[Off]
- Disable digital output.
•
[PCM Only]
- Downmix to two-channel
audio format.
•
[LPCM Output]
- Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
[48kHZ]
- For discs recorded at sampling
rate of 48 kHz.
•
[96kHZ]
- For discs recorded at sampling
rate of 96 kHz.
Note
•
[LPCM Output]
setting is only available if the
[Digital
Output]
is set to
[PCM Only]
.
The higher the sampling rate, the better the sound
•
quality.
[Volume]
Set the default volume level when you play a disc.
1. Press
OK
.
2. Press
to set the volume.
3. Press
OK
to confi rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D]
- Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
[Movie Mode]
- Select a sound effect for
movies.
•
[Music Mode]
- Select a sound effect for
music.
[Speaker Setup]
Optimize the surround output for the connected
speakers.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
[Off]
- Turn off CD-upsampling.
•
[88.2kHz]
- Convert to twice the original
sampling rate.
•
[176.4kHz]
- Convert to four times the original
sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On]
- Enjoy quiet viewing at night.
•
[Off]
- Enjoy surround sound with a full
dynamic range.
[DivX(R) VOD Code]
Display the DivX
®
registration code and
deregistration code.
•
[Registration]
- Obtain a registration code to
register this product on website.
•
[Deregistration]
- Obtain a deregistration
code to cancel the registration of this product
on website.
Note
Use this product’s DivX registration code when you rent
•
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
®
VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
1
Press
.
»
[General Setup]
menu is displayed.
2
Press
to select
[Audio Setup]
, and then
press to enter the submenu.
3
Select an option, and then press
OK
.
4
Select a setting, and then press
OK
.
To return to the previous menu, press
•
.
To exit the menu, press
•
.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[LT/RT]
- For the surround sound output
through two speakers.
•
[Stereo]
- For the stereo output.
•
[Multi Channel]
- For multi-channel output.
[Digital Audio]
Select a digital setting based on the digital amplifi er/
receiver that is connected through the digital jack
(coaxial/digital).
•
[Digital Output]
- Select a type of digital
output.
English
EN