4-15
DECK MECHANISM ADJUSTMENT
2. Previous Preparation for Deck Adjustment
(Preparation to load the VCR (VCP) with cassette tape not inserted)
3. Torque Measuring
1) Unplug the power cord.
2) Separate the top cover and the plate assembly top.
3) Plug in power cord.
4) Turn the VCR (VCP) on and load the cassette while
pushing the lever stopper of the holder assembly CST
backward. In this case, clog both holes on the housing rail
part of chassis to prevent detection of the end sensor.
If doing so, proceeding to the stop mode is done. In this
status, input signals of all modes can be received.
However, operation of the Rewind and the Review is
impossible since the take-up reel remains at stop status
and so cannot detect the reel pulse (however, possible for
several seconds).
Purpose of Measuring: To measure and check the reel torque on the take-up part and the
supply part that performs basic operation of the VCR (VCP) for
smoothly forwarding the tape.
Measure and check followings when the tape is not smoothly
wound or the tape velocity is abnormally proceeded:
Fixtures and tools used
VCR (VCP) status
Measuring method
• Torque Gauge
• Play (FF) or Review
• Try to operate the VCR (VCP) per mode with the
(600 g.cm ATG)
(REW) Mode
tape not inserted (See ‘2. Prior Preparation for
• Torque Gauge Adaptor
Deck Adjustment).
• Cassette Torque Meter
• Measure after adhering and fixing the torque
SRK-VHT-303
gauge adaptor to the torque gauge (Fig. C-3-1)
• Read scale of the supply or take-up part of the
cassette torque meter (Fig. C-3-2).
Item
Mode
Instruments
Reel Measured
Measuring Value
Fast forward Torque
Fast Forward
Torque Gauge
Take-Up Reel
More than 400g°cm
Rewind Torque
Rewind
Torque Gauge
Supply Reel
More than 400g°cm
Play Take-Up Torque Play
VHT-303
Take-Up Reel
40~100g°cm
Review Torque
Review
VHT-303
Supply Reel
120~210g°cm
SRK
VIDEO
CASSETTE
TORQUE
METER
VHT-303
S
R
K
-
V
H T
- S
SR
K - V H T - T
300
250
200
150
50
0
300
250
200
150
50
0
100
Fig. C-3-2
Fig. C-3-1
Torque Gauge
Torque Gauge
Adaptor
Reel Table
NOTE
• Cassette Torque Meter (SRK-VHT-303)
• Torque Gauge (600g.cm ATG)
Adhere the torque gauge adaptor to the torque gauge for measuring the value.
Summary of Contents for DVP3350V/01
