3-2
VCR PART
VCR ELECTRICAL ADJUSTMENT PROCEDURES
1. SERVO ADJUSTMENT
1) PG Adjustment
• Test Equipment
a) OSCILLOSCOPE
C) PAL MODEL : PAL SP TEST TAPE
b) NTSC MODEL : NTSC SP TEST TAPE
MODE
MEASUREMENT POINT
ADJUSTMENT POINT
SPECIFICATION
PLAY
V.Out
R/C TRK JIG KEY
6.5 ± 0.5H
H/SW(TP)
• Adjustment And Specification
•
Adjustment Procedure
a) Insert the SP Test Tape and play.
Note - Adjust the distance of X, pressing the Tr) or Tracking(-) when the “ATR” is blink after the
SP Test Tape is inserted.
b) Connect the CH1 of the oscilloscope to the H/SW(TP) and CH2 to the Video Out for the VCR.
c) Trigger the mixed Combo Video Signal of CH2 to the CH1 H/SW(TP) and then check the distance (time
difference), which is from the selected A(B) Head point of the H/SW(TP) signal to the starting point of
the vertical synchronized signal, to 6.5H ± 0.5H (412µs, 1H=63µs).
•
PG Adjustment Method
a-1) Playback the SP standard tape
b-2) Press the “OK” key on the Remote control and the “REC” key on the Front Panel at the same time for
more than 5seconds, then it goes in to Tracking initial mode.
c-3) Repeat the above step(No.b-2), then it finishes the PG adjusting automatically.
d-4) Stop the playback, then it goes out to PG adjusting mode after mony the PG data.
•
CONNECTION
•
WAVEFORM
V.Out
H/SW(TP)
OSCILLOSCOPE
CH1 CH2
V.out
R/C KEY
H/SW
(TP)
H/SW
Composite
VIDEO
6.5H(416us)
Summary of Contents for DVP3350V/01
