16
4
Insert one end of the audio (Cinch) cable into the red/white Cinch
socket
OUT L AUDIO R
at the back of the DVD recorder and the
other end into the audio input socket (usually red/white) on the TV
set (usually labelled 'Audio in' or 'AV in'. See TV operating
instructions).
5
Switch on the TV set. Switch the TV set over to the SVHS input
socket or select the relevant programme number. Please see your
TV's operating instructions for the programme number you need.
6
Insert one end of the supplied mains cable into the mains socket
4
MAINS
at the back of the DVD recorder and the other end into
the wall socket.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off. How you switch on this function
again, read in the chapter 'User preferences' in the section 'standby'.
7
Switch on the DVD recorder using
STANDBY/ON
m
.
IS TV ON?
'
will appear on the display.
Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.
Connecting with video(CVBS) cable
This cable, usually with yellow Cinch connectors, is used for transmitting the Composite Video
signal (FBAS, CVBS). In this method of transmission the colour signal and the brightness signal
are transmitted on the same cable. In certain circumstances, this can lead to problems with the
picturem, such as 'Moiré' patterns.
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a video (CVBS)cable (3, yellow plug), an
audio cable (4, red/white plug).
1
Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN
socket at the back of the DVD recorder.
2
Insert one end of the supplied aerial cable into the
TV OUT
socket at
the back of the DVD recorder and the other end into the aerial input
socket at the back of the TV set.
Connecting the DVD recorder
