23
EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
23
EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
1
Press [STANDBY-ON
y
y
].
Turn the TV on. Select the input to
which the unit is connected.
2
Use [
K
/
L
] to select your desired
language, then press [OK] to set
language.
Initial Setup
OSD Language
English
Français
Español
3
Use [
K
/
L
] to select the type of
broadcasting signal, then press [OK].
Initial Setup
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Auto Presetting Now
CH 1
4
Press [OK] to activate “Clock Setting”.
Initial Setup
Clock Setting
- - - / - - / - - - - ( - - - )
- - : - - - -
5
Proceed to step 5 in “Manual Clock
Setting” on page 28.
• If a PBS (public broadcasting station) is
available in your area, follow “Auto Clock
Setting” on page 27.
E7H40UD_EN_v5.indd 23
E7H40UD_EN_v5.indd 23
2008/06/02 14:49:36
2008/06/02 14:49:36
