Software upgrade
A. Preparation to upgrade software
1) Start the CD Burning software and create a new CD
project (Data Disc) with the following setting:
Label: _____
(No need the label name)
File System: ISO
9660
File Name:
DMN8600.CUB
(For DVDR3375/93)
Note: It is required capital letter for the Label name
& the File System name.
2) Burn the data onto a blank CDR
B. Procedure for software upgrade:
1) Power up the set and insert the prepared Upgrade
CDR.
2) The set will start reading disc & response with the
following display on TV screen:
Software upgrade disc DETECTED, select OK
start upgrading or CANCEL to exit.
Press OK to start.
3) After press <OK> button to confirm, then screen will
display:
Upgrading software, please wait. Do not switch off
the power…….
4) The upgraded disc will automatically out when the
upgrading complete, then take out the disc and
power off the set.
C. Read out the software versions to confirm upgrading
1) Power up the set and press <system menu> button on the
remote control.
2) Press <0><0><0><9> <OK> button.
The software version and other information are display on
the TV screen as follows:
Build: XXX XXX XXX XXX XXX
C ware: XXXX
Nav: XXXX (Software version of decoder)
XX XX XX XX XX:XX:XX (Updated date)
Ver: XXXX (Software version of Servo)
Code: XXX ( Region code )
Region Code, Software Version& Upgrades
Caution: The set must not be power off during
upgrading, in that case the decoder board will
be damaged entirely.
3-1
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料
