Philips DVDR3320V Series Service Manual Download Page 172

Page: 172 / 196

5-47

5. Optical Power Setting

When replacing Travers ass’y including Pick-up or Loader PCB, Optical Power Setting should be performed for Pick-up
and Loading PCB’s matching.

➀

DVD LD optocal Power Setting
• Select DVD and Setup mode
• Push

. (Read Power On. Strong Red light can be seen from pick up optical lens.)

•  Measure optical power.
•  Write measurement value in Read Power.
•  Push

. (Write power On.) (Caution) Light is very strong. Never look at the light directly.

• Measure optical power
• Write measurement value in Read Power and push LD off

• Push

. (Measurement value is inputted to EEPROM)

➁

DVD LD optocal Power Setting
• Select CD and Setup mode
• Push

. (Read Power On. Weak Red light can be seen from pick up optical lens.)

•  Measure optical power.
•  Write measurement value in Read Power.
•  Push

. (Write power On. Weak Red light can be seen.)

• Measure optical power and push LD off

• Write measurement value in Read Power.
• Push

. (Measurement value is inputted to EEPROM)

Summary of Contents for DVDR3320V Series





































































































































































































Search results

Summary of Contents for DVDR3320V Series

Reviews:

Philips DVDR3320V Series, Service Manual, Page: 172 / 196

Search results

Summary of Contents for DVDR3320V Series

Reviews: