68
Problem solving for programmed
recordings
PROBLEM
SOLUTION
DVD recorder is not
responding
b
While a programmed recording is being made, you cannot operate your recorder manually. If you
want to cancel the programmed recording, press
STANDBY
m
.
'
Switch off, timer
recording
' flashes on
the TV screen.
b
The DVD recorder was switched on several minutes before the start of a programmed recording.
Switch off the DVD recorder with
STANDBY
m
. A programmed recording (timer) will only
function if the DVD recorder is switched off (button
STANDBY
m
).
Error message: '
Insert
recordable disc
'
b
Either no disc has been inserted or you cannot record to this disc. Insert a disc that you can
record onto. Switch off the DVD recorder using
STANDBY
m
.
The error message
'
Disc locked
' appears
briefly on the screen.
b
A write-protected disc has been inserted. Cancel the protection (see 'Preventing accidental
erasing of discs' in 'Manual Recording') or insert a different disc.
Error message:
'
Memory full
'
b
If this error message appears after pressing
TIMER
, then all the TIMER blocks are already
programmed. No more recordings can be programmed. Press the
C
button. If you want to clear
or check a programmed recording (TIMER block), select it with
B
or
A
.
The '
Data error
'
message appears on
the screen.
b
The data for the recording could not be transferred. Please check the date, start time and end
time of the programmed recording.
'
Collision
' appears on
the screen.
b
The information for two programmed recordings overlap.
b
If you ignore this error message the TV programme with the earlier start time will be recorded
first. You will miss the start of the second programme.
b
Change the information for one of the recordings.
b
Delete one of the recordings
Programming a recording (TIMER)
