Philips DVD740VR, Owner'S Manual, Page: 41 / 80

POWER
MARKER
SEARCH MODE DISPLAY SLOW ZOOM
OUTPUT SELECT
3
4 5 6
7 8 9
SPEED
TIMER SET
0
+10
2 1
VCR DVD
CLEAR
REPEAT
SETUP
TITLE RETURN MODE
CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
REC/OTR REPEAT
DISC
MENU OK
PAUSE
REW FF
PLAY STOP
VCR/TV
MEMORY
STATUS/EXIT TIME SEARCH
Time Search 41
Follow the steps below to program the DVD/VCR to search for-
ward or backward on a tape a specific length of time.There must
be a tape in the DVD/VCR.
●
Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1
Press VCR, then press SEARCH MODE/TIME
SEARCH.
2
Within 10 seconds, use the Number buttons to
enter the desired length of time you want to skip
forward or backward.
For example, for 1 hour, 25 min-
utes, press Number buttons 1, 2, 5. Or, for five minutes,
press Number buttons 0, 0, 5.
3
Within 10 seconds, press FF
g
(
B
) or REW
h
(
s
). The DVD/VCR will skip over the specified length of
time, then begin playback.
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and min-
utes. For example, to search forward
70 minutes, press 1,1,0 at step 2.
• You cannot do a Time Search while
recording.
• To remove the Time Search display,
press SEARCH MODE/TIME
SEARCH again.
• To cancel a Time Search that is in
progress, press STOP
C
(
p
).
• If the end of the tape is reached
during a Time Search, the Time
Search will be cancelled.The
DVD/VCR may rewind the tape.
Details are on page 43.
Helpful Hints
TIME SEARCH
0:00
ENTER SEARCH TIME
3
2
1
VCR
H9231CD(EN).QX3 02.9.5 7:13 PM Page 41