manualshive.com logo in svg

Philips DVD740VR, Owner'S Manual, Page: 17 / 80

Share
Download
Philips DVD740VR Owner'S Manual Download Page 17

POWER

MARKER

OUTPUT SELECT

3

4

5

6

TIMER SET

2

1

VCR

DVD

CLEAR

REPEAT

SETUP

TITLE

RETURN

MODE

CHANNEL/SKIP

A-B

AUDIO

ANGLE

SUBTITLE

REC/OTR

REPEAT

DISC

MENU

OK

PAUSE

REW

FF

PLAY

STOP

VCR/TV

MEMORY

Disc Playback  17

•  An “X” may appear at the top right

corner of the TV screen when you
try a feature. Either the feature is
not available on the Disc, or the
DVD/VCR cannot access the feature
at this time.This does not indicate a
problem with the DVD/VCR.

•  If a Disc is dirty or scratched, the

pictures may appear distorted or
playback may stop. Remove the
Disc and turn off the DVD/VCR.
Disconnect the power cord, then
reconnect it. Clean the Disc, then
turn on the DVD/VCR again and
reinsert the Disc for playback.

•  When the DVD or CD light appears

on the display panel, the Disc is
loaded completely and is ready for
playback.

•  When you press OPEN/CLOSE or

PLAY (DVD) on the front of the
DVD/VCR when the power is off,
the DVD/VCR will turn on automati-
cally and will be in DVD mode.

Helpful Hints

●

Before you begin, turn on the power of the TV, stereo receiver
and any other equipment connected to the DVD/VCR. Make
sure the TV and the stereo receiver (if applicable) are set to
the correct channel.

Details are on pages 8-13.

1

Press POWER 

y

y

to turn on the DVD/VCR.

“P-ON”

will appear briefly on the display panel.The DVD/VCR will
be in VCR mode.

2

Press OUTPUT SELECT so the red DVD light
appears on the front of the DVD/VCR.Then, press
DVD.

3

Press OPEN/CLOSE on the front of the DVD/VCR
to open the Disc tray.

4

Place a Disc into the tray.

Some DVDs are recorded on both sides. Make sure the
side you want to play is facing up. Or, if the DVD is record-
ed on only one side, place the Disc in the tray with the
label facing up.

5

Press PLAY 

B

(

o

).

The tray will close automatically, and

playback will begin at the first Chapter or Track of the
Disc.
Or, you may press OPEN/CLOSE or press the tray toward
the DVD/VCR to close the tray; DVD playback will start
automatically.
If a DVD menu appears instead,

see page 48.

With some Audio CDs, playback will not begin unless you
press PLAY 

B

(

o

).

6

Press STOP 

C

(

p

) to stop playback.

If Disc playback is

stopped for more than five minutes, a screen saver will
appear.

Details are on page 75.

1

2

6

Insert a Disc.

4

Remember, this DVD/VCR 

will play only certain Discs.

See page six for details.

5

Press OPEN/CLOSE 

on

the DVD/VCR.

3

DVD

AUDIO CD

H9231CD(EN).QX3  02.9.5 7:13 PM  Page 17

Summary of Contents for DVD740VR

















































































Reviews:

No comments